Automatic Water Level Controller

AM3 water pump controller applies for many kinds of pump, such as submersible pump, slush pump, centrifugal pump, stage pump, well pump and so on,  the input voltage is AC380V (50-60HZ),±10%,THREE PHASE and matching power are 0.37-1.5KW, 1-4KW, 1-7.5KW, 2.2-11KW, 2.2-15KW


Control Method
Ø  Control water supply by probe
Ø  Control water supply by float switch
Ø  Control water supply by pressure gauge and pressure tank
Ø  Control water drainage by probe
Ø  Control water drainage by float switch
Ø  Control water drainage by no load setting

Advantages
 
Ø  Works by digital chips
Ø  Act the function of up/down liquid level and pressure control into a role
Ø  With 'A key setting' function
Ø  Patent technical, monitor with AC digital signal, durable probes
Ø  Easy to installation and with friendly interface

Ø  'A key setting ' and Manual working mode
Ø  Dry running protection or called no load protection, means the motor will stop while the motor rotate with no load
Ø  Over load protection or called over current protection
Ø  Ultra low voltage protection
Ø  Pump stalled protection
Ø  Digital Voltage and  Current display
Ø  Recovery time of no load be adjusted from 1-240 minutes
Ø  The latest 5 failures query
Ø  Friendly wire connection
Ø  AC digital signal monitor function with patent
Ø  Humanization design
Ø  Small volume an easy installation 

Main Technical Data
Ø  Rated input voltage and phase: AC380V/50-60HZ,±10%
Ø  Rated output power of motor: 0.37-1.5KW, 1-4KW, 1-7.5KW, 2.2-11KW, 2.2-15KW.
Ø  Static power wastage:<3.5W
Ø  Dynamic power wastage:<10W
Ø  Ultra low voltage trip voltage: <300V
Ø  Ultra low voltage trip response time: ≤3 SEC
Ø  Stalled trip response time: ≤5 SEC
Ø  No load trip response time: ≤20 SEC
Ø  Over load reverse lag response time: 1-50 SEC
Ø  Error range of response time against over load reverse lag response time:±15%
Ø  Liquid level control style:AC digital signal monitor by probe, float switch
Ø  The longest control distance:≤500M

 Water Supply by Probe
1) Please switch 'Pressure /Liquid level' to 'Liquid level', and switch 'water supply /water drainage' to 'water supply'.
2) The motor starts while the water in the water supply tank drops to the mid level.
3)The motor stops while the water in the water supply tank reaches the high level, the low level probe works as loop.

Water Drainage by Probe
1)Please switch 'Pressure /Liquid level' to 'Liquid level', and switch 'water supply /water drainage' to 'water drainage'
2)The motor starts while the water in the water drainage tank reaches the high level.
3)The motor stops while the water in the water drainage tank drops to the mid level, the low level probe works as loop.(No load current be set up 0.00A)
Because the sewage has strong corrosiveness, we suggest that equip with float switch for monitoring while enable 'water drainage' function for draining sewage.

Water Supply by Pressure Tank
1)Please switch 'Pressure /Liquid level' to 'Pressure', and switch 'water supply /water drainage' to 'water supply'
2)The motor starts while pressure drops to min. pressure contactor.
3)The motor stops while pressure rises to max. pressure contactor, the movable contactor works as loop.
The pressure tank volumn should be appropriat. Otherwise, the pump will restart frequently.

Water Supply by Float Switch
1) The motor starts while the float switch floats to the bottom of water supply tank.
2) The motor stops while the float switch floats to the top of water supply tank.

Water Drainage by Float Switch
1)The motor starts while the float switch floats to the top of water drainage tank.
2)The motor stops while the float switch floats to the bottom of water drainage tank.