Basic Info.
Function
Automatic Control
Customized
Non-Customized
Product Description
ASD3 water pump controller is used for control 2 pumps, has 'A master B standby', 'B master A standby' and '2 pumps alternation' working modes. It applies for many kinds of pump, such as submersible pump, slush pump, centrifugal pump, stage pump, well pump, booster pump, pipeline pump and so on, the input voltage is AC380V(50-60HZ),±10%, THREE PHASE and matching motor power can be from 0.75-4KW,1-7.5KW,2.2-11KW,2.2-15KW.
Control Method
Ø Control water supply by probe (2 pumps can work at the same)
Ø Control water supply by float switch (2 pumps can work at the same)
Ø Control water supply by pressure gauge and pressure tank (2 pumps can't work at the same)
Ø Control water drainage by probe (2 pumps can work at the same)
Ø Control water drainage by float switch (2 pumps can work at the same)
Ø Control water drainage by no load setting (2 pumps can't work at the same)
Features
Ø Works by digital chip, achieve the integrated control with probe, float switch and pressure tank for water supply and water drainage
Ø 1 pump controller control 2 pumps, has 2 pumps alternative, A master B Standby and B master A Standby functions.
Ø Auto and Manual working mode
Ø Dry running protection or called no load protection, means the motor will stop while the motor rotate with no load
Ø Over load protection or called over current protection
Ø Lack Phase Protection
Ø Ultra low voltage protection
Ø Pump stalled protection
Ø Digital Voltage and Current display
Ø Recovery time of no load be adjusted from 1-250 minutes
Ø The latest 10 failure enquires
Ø Friendly wire connection
Ø AC digital signal monitor function with patent
Ø Humanization design
Ø Easy installation and simple debug
Main Technical Data
Ø Rated input voltage and phase:AC380V/50-60HZ,±10%
Ø Rated output power of power: 0.75-4KW, 1-7.5KW, 2.2-11KW, 2.2-15KW
Ø Static power wastage: <3.5W
Ø Dynamic power wastage: <10W
Ø Lack phase trip response time : ≤3SEC
Ø Ultra low voltage trip voltage: <300V
Ø Ultra low voltage trip response time: ≤20 SEC
Ø Stalled trip response time: ≤5 SEC
Ø No load trip response time: ≤20 SEC
Ø Over load reverse lag response time: 1-50 SEC
Ø Error range of response time against over load reverse lag:±15%
Ø Liquid level control style:AC digital signal monitor by probe, float switch
Ø The longest control distance:≤500M
Ø Pressure control style: pressure gauge, pressure switch (NO/NC)
Water Supply and Water Drainage Work Together by Probe (Only use for the situation that 2 pumps do not work at the same time)
1) Please switch 'pressure/liquid level' to 'liquid level.
2) The motor stops while the water in the water drainage tank drops to the mid level and starts while it rises to the high level, the low level probe works as loop.
3) The motor starts while the water in the water supply tank drops to the mid level and stops while it rises to the high level, the low level probe works as loop.
Water Drainage by 3 Probes and 1 Extra Probe(Only use for the situation that 2 pumps work at the same time)
1) Please switch '2 pumps work at the same time' to 'ON', and then, '2 pumps work' switch to 'Water Drainage'
2) The motor starts while the water in the water drainage tank rises to the high level, and 2 pumps start for water drainage while the water level rises to the Extra Probe level. The motor stops while the water drops to the mid level, the low level works as loop.
Because the sewage has strong corrosiveness, we suggest that equip with float switch for monitoring while enable 'water drainage' function for draining sewage.
Water Supply by 3 Probes and 1 Extra Probe(Only use for the situation that 2 pumps work at the same time)
1) Please switch '2 pumps work at the same time' to 'ON', and then, '2 pumps work' switch to 'Water Supply'
2) The motor starts while the water in the water supply tank drops to the mid level, and 2 pumps start for water supply while the water level drops to the Extra Probe level. The motor stops while the water rises to the high level.
Because the pressure is very high while 2 pumps work at the time, please pay attention to applicability of your water supply pipeline for avoiding the damage.
Water Supply by Pressure Tank (Only use for the situation that 2 pumps do not work at the same time)
1) Please switch 'Pressure /Liquid level' to 'Pressure', and switch 'water supply/water drainage' to 'Water Supply'.
2) The motor starts while pressure drops to min. pressure contactor, and stops while pressure rise to max. pressure contactor, the movable contactor works as loop.
The pressure tank volume should be appropriate. Otherwise, the pump will restart frequently.
Water Supply by Float Switch
1) Please switch 'Pressure /Liquid level' to 'Liquid level', and switch 'water supply/water drainage' to 'water supply'.
2) The motor starts while the float switch goes the bottom of water supply tank.
3) The motor stops while the float switch goes the top of water supply tank.
Water Drainage by Float Switch
1) Please switch 'Pressure /Liquid level' to 'Liquid level', and switch 'water supply /water drainage' to 'water drainage'.
2) The motor starts while the float switch goes the top of water drainage tank.
3) The motor stops while the float switch goes the bottom of water drainage tank.
Address:
Room 215, No. 69, HuaDiDaDaoNan Street, Li Wan District, Guangzhou, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Company Introduction:
ANONA is a reliable supplier for automatic water level controllers in Guangzhou, China. We are a professional manufacturer since year 2002 for water pump controller for single phase water pumps and 3 phase water pumps. All of our electronic water level controllers are with patent right and comply with CE standard.
Automatic Water pump control panel is applicable in hospital school/college, bungalow, residential apartment, Commercial complexes and industries.
Our mission is Providing Customer with Safe Purchasing and Excellent Service.
Believe in us, we are together.
